peek granule peek material with 10% carbon fiber 10% ptfe 10% graphite

peek ex 10% carbon 10% graphite 10% ptfe | cope plastics

PEEK EX 10% Carbon 10% Graphite 10% PTFE | Cope Plastics

PEEK Extruded Bearing Grade PEEK Bearing Grade (Extruded) is enhanced with 10% Carbon, 10% Graphite, and 10% PTFE fillers to improve the wear performance of the material. It also has higher strength and stiffness than unfilled, improved PV limits, and a much lower coefficient of friction.

Get Price
10% carbon fiber 10% ptfe 10% graphite filled peek plate

10% Carbon Fiber 10% Ptfe 10% Graphite Filled Peek Plate

10% Carbon Fiber 10% Ptfe 10% Graphite Filled Peek Plate , Find Complete Details about 10% Carbon Fiber 10% Ptfe 10% Graphite Filled Peek Plate,Peek5600lf30 Extruded Sheet,Buffet Warming Plate,Peek Plate from Plastic Sheets Supplier or Manufacturer-Jiangsu Chaoju High Performance Polymers (PEEK) Technology Co., Ltd.

Get Price
peek filled with carbon fibre, graphite, ptfe - tecapeek

PEEK filled with carbon fibre, graphite, PTFE - TECAPEEK

PEEK modified with 10% carbon fibre, 10% graphite and 10% PTFE This compression moulded material is a Victrex® PEEK polymer modified with 10% each of carbon fibre, graphite and PTFE for improved sliding and wear properties.

Get Price
gehr plastics peek-mod polyetheretherketone, 10% ptfe, 10%

GEHR Plastics PEEK-mod Polyetheretherketone, 10% PTFE, 10%

PEEK exhibits excellent chemical resistance, very good dielectric properties up to 260°C and a very good resistance to all kinds of radiation.Properties:very high mechanical strengthvery high rigidityvery high thermal stabilityvery high creep resistancevery high dimensional stabilityvery high radiation resistancevery high hydrolysis

Get Price
gehr plastics peek-mod polyetheretherketone, 10% ptfe, 10%

GEHR Plastics PEEK-mod Polyetheretherketone, 10% PTFE, 10%

Polyetheretherketone, 10% PTFE, 10% Graphite, 10% Carbon Fiber, Polyether etherketone can be used at very high temperatures and it shows a good mechanical strength, toughness, hardness, flexural strength, and torsional strength. PEEK exhibits

Get Price
carbon fiber peek, carbon fiber peek suppliers and

carbon fiber peek, carbon fiber peek Suppliers and

Carbon Fiber + Graphite + PTFE Lubricant PEEK resin PEEK KT-880 SL30 PEEK granule PEEK material with 10% carbon fiber 10% PTFE 10% graphite . US $70.00-$90.00 / Kilogram 1 Kilogram (Min. Order) 3 YRS . Jiangsu Chaoju High Performance Polymers (PEEK) Technology Co., Ltd.

Get Price
peek mod. ptfe, graphite, carbon fibre - tecapeek pvx

PEEK mod. PTFE, graphite, carbon fibre - TECAPEEK PVX

PEEK modified TECAPEEK PVX black is a modified PEEK material that may be based on Victrex® PEEK 450G or Solvay Ketaspire® KT-820. The material is classified in the same performance category as other bearing grade PEEK products such as Victrex® PEEK™ FC30. We supplement the PEEK base polymer with 10% each of PTFE, graphite, and carbon fiber.

Get Price
rod with ptfe/cf/graphite – 10-10-10 (mod) - peek-shop.de

Rod with PTFE/CF/Graphite – 10-10-10 (mod) - PEEK-shop.de

We offer virgin, natural PEEK (nat) and compounded PEEK: PTFE/CF/Graphite – 10-10-10 (mod), PTFE (ptfe), Carbon Fiber (cf). When you order PEEK-rods we will apply a rebate for large volumes and a surplus-cost for very small orders; furthermore a logistic-cost will be added for the transport to your destination.

Get Price
peek mod. ptfe, graphite, carbon fibre - tecapeek pvx

PEEK mod. PTFE, graphite, carbon fibre - TECAPEEK PVX

We suplement the PEEK base polymer with 10% each of PTFE, graphite, and carbon fibre. That makes TECAPEEK PVX an ultra high performance bearing material that incorporates the properties of a premium polymeric matrix material, with optimum levels of specific wear enhancing additives. It is ideally suited for technical bearing and wear applications.

Get Price
peek polymer (polyether ether ketone) guide - drake plastics

PEEK Polymer (Polyether Ether Ketone) Guide - Drake Plastics

Bearing Grade PEEK offers the lowest wear rates among the PEEK grades for demanding wear applications. The most common grades contain a combination of graphite, PTFE and carbon fiber with the most common ration being 10-10-10 blend. This combination promotes low friction and higher conductivity enabling for higher PVs and lower wear rates.

Get Price
peek mod | peek ptfe-graphite-carbon filled rod

PEEK Mod | PEEK PTFE-Graphite-Carbon Filled Rod

peek-mod B.I.R.S. Machine & Supply distributor of PEEK-mod rod. PEEK-mod is a Polyetheretherketone that is reinforced with 10% of PTFE, 10% graphite and 10% carbon fiber offers excellent friction, bearing and wear properties verses PEEK unfilled.

Get Price
victrex 450fc30 archives - drake plastics - store

VICTREX 450FC30 Archives - Drake Plastics - Store

Victrex 450FC30 is a wear resistant PEEK based grade containing 10% PTFE, 10% carbon fiber and 10% graphite. VICTREX 450FC30 rod is among the most versatile wear materials well suited for wear rings, bushings/bearings, thrust washers in both wet and dry environments. FC30 can also be used for high pressure seals and pump parts and scraper blades where inertness to corrosive chemicals is required.

Get Price
lati latilub 88/50-20grt k/10 peek based, 10% carbon fiber

LATI LATILUB 88/50-20GRT K/10 PEEK Based, 10% Carbon Fiber

Specific Notes for this Material: PEEK, 10% carbon fiber, 20% graphite and PTFE, flame retardant UL94 V0, halogens and red phosphorous free. Disclaimer from LATI: This document contains information based on average values as obtained from the results of laboratory tests and observations made on LATI materials. Tested materials were injection

Get Price
compression molded products compound no. materials

Compression Molded Products Compound No. Materials

PEEKTM 10%Graphite, 10% PTFE, 10% Carbon Fiber XP-66 PPS 30% Glass Natural XP-101 PEEK TM 15% Graphite, 10% PTFE XP-68 PPS 25% Glass, 10% Graphite Are available in high performance materials such as PPS, PEEK, PTFE, PCTFE and a full family of Polyimides and Polyamide-imides. These materials are molded with virgin resins and formulations

Get Price
peek plastic granule for medical field manufacturers and

PEEK Plastic Granule for medical field Manufacturers and

China PEEK Plastic Granule for medical field supplier,Xiamen Keyuan Plastic Co.,Ltd,High Quality Low Price PEEK Plastic Granule for medical field. CF Filled Nylon 6 CF Price,electrically Conductive Nylon 6 With Carbon Fiber For Injection Molding; Black PA6+GF25% Granules Material;

Get Price
peek mod. ptfe, graphite, carbon fibre - tecapeek pvx

PEEK mod. PTFE, graphite, carbon fibre - TECAPEEK PVX

PEEK modified. TECAPEEK PVX black is a modified PEEK material that may be based on Victrex® PEEK 450G or Solvay KetaSpire® KT-820. It is classified in the same performance category as Victrex® PEEK™ FC30. We suplement the PEEK base polymer with 10% each of PTFE, graphite, and carbon fibre.

Get Price
products - high performance plastics - vanéflon

Products - High Performance Plastics - Vanéflon

At Vanéflon you can find the right material for your product or project. We are specialised in high quality Engineering / High Performance Polymers. PEEK Carbon Fiber PTFE + 50% Bronze + 10% Graph. PTFE + 10% PPS + 5% Carbon Fiber + 5% Graphite PTFE P84 Graphite PTFE + 15% Carbon Fiber + 10% Graphite PTFE + 20% Bronze + 10% Carbon

Get Price
ptfe carbon fibre - acoplastic

PTFE Carbon Fibre - Acoplastic

PTFE Carbon Fiber Acoflon® 212 CF Among other things, carbon fibre is used in our compound Acoflon® 212 CF, characterized by: High elastic modulus Good abrasion resistance Good chemical resistance These improved properties are especially sought in the production of: Bearings and piston rings Seals and gaskets Offshore

Get Price
ketaspire® peek polyether ether ketone | solvay

KetaSpire® PEEK Polyether Ether Ketone | Solvay

However, PEEK can operate at higher temperatures and retains its excellent mechanical properties at continuous-use temperatures up to 240 °C (464 °F), allowing it to replace metal in severe end-use environments. Glass fiber-reinforced and carbon fiber-reinforced grades provide a wide range of performance options.

Get Price
datasheet downloads - victrex

Datasheet Downloads - Victrex

Get the material data that you need. Easy flow, filled with 30% carbon fiber, PTFE and graphite. Add View VICTREX PEEK 150FW30 Easy flow, filled with 30% carbon fiber and PTFE Carbon fiber reinforced PEEK granules for injection moulding, black. Add View VICTREX FG™ 200/201 Tough & ductile.

Get Price
peek mod | peek ptfe-graphite-carbon filled rod

PEEK Mod | PEEK PTFE-Graphite-Carbon Filled Rod

peek-mod B.I.R.S. Machine & Supply distributor of PEEK-mod rod. PEEK-mod is a Polyetheretherketone that is reinforced with 10% of PTFE, 10% graphite and 10% carbon fiber offers excellent friction, bearing and wear properties verses PEEK unfilled.

Get Price
vestakeep® peek

VESTAKEEP® PEEK

G Granules P Powder FP Fine powder GHP High purity granules UFP Ultrafine powder GF Glass fiber FC30 PTFE/graphite/carbon fiber (10:10:10) CF Carbon fiber CC20 Ceramic-filled 20% * modified for low friction 5000 P 5000 G ground 5000 FP compounded 5000 CF30 4000 FP 4000 GF30 4000 GF30 black 4000 GF15 4000 FC30 4000 CF30 4000 CF10 4000 CC20 4000

Get Price
ensinger - special polymers

Ensinger - Special Polymers

PEEK Compound: 10% PTFE, 15% graphite, and 3% carbon fiber filled TECAPEEK® CM XP114 BLACK PEEK Compound: 40% carbon fiber reinforced material

Get Price
peek mod. ptfe, graphite, carbon fibre - tecapeek pvx

PEEK mod. PTFE, graphite, carbon fibre - TECAPEEK PVX

PEEK modified. TECAPEEK PVX black is a modified PEEK material that may be based on Victrex® PEEK 450G or Solvay KetaSpire® KT-820. It is classified in the same performance category as Victrex® PEEK™ FC30. We suplement the PEEK base polymer with 10% each of PTFE, graphite, and carbon fibre.

Get Price
professional poly ether ether ketone peek material and

Professional Poly Ether Ether Ketone PEEK Material and

Product Name:Wearproof PEEK Synonyms: 4,4’-Difluorobenzophenone,hydroquinonepolymer;Wearproof PEEK CAS No.:29658-26-2;31694-16-3 Property:Polyether ether ketone (PEEK) is a colourless organic thermoplastic polymer in the polyaryletherketone (PAEK) family, used in engineering applications. Applications: The Wearproof PEEK is 10% PTFE + 10% carbon fiber + 10% graphite reinforced, it can be

Get Price
peek plastic granule for medical field manufacturers and

PEEK Plastic Granule for medical field Manufacturers and

China PEEK Plastic Granule for medical field supplier,Xiamen Keyuan Plastic Co.,Ltd,High Quality Low Price PEEK Plastic Granule for medical field. CF Filled Nylon 6 CF Price,electrically Conductive Nylon 6 With Carbon Fiber For Injection Molding; Black PA6+GF25% Granules Material;

Get Price
products - high performance plastics - vanéflon

Products - High Performance Plastics - Vanéflon

At Vanéflon you can find the right material for your product or project. We are specialised in high quality Engineering / High Performance Polymers. PEEK Carbon Fiber PTFE + 50% Bronze + 10% Graph. PTFE + 10% PPS + 5% Carbon Fiber + 5% Graphite PTFE P84 Graphite PTFE + 15% Carbon Fiber + 10% Graphite PTFE + 20% Bronze + 10% Carbon

Get Price
polyetheretherketone (peek) compounds - rtp company

Polyetheretherketone (PEEK) Compounds - RTP Company

Polyetheretherketone (PEEK) Compounds. Carbon Fiber 10% - High Flow: RTP 2283 LF: Carbon Fiber 20% - Low Flow: RTP 2283 HF: Carbon Fiber Reinforced - PTFE Lubricated - Graphite Lubricated: RTP 2299 X 91191: Electronic Encapsulation: RTP 2299 X 115088 C: Carbon Nanotube - Glass Fiber Reinforced - ESD Protection

Get Price
ptfe | et - eclipse engineering, inc.

PTFE | ET - Eclipse Engineering, Inc.

Eclipse ET materials are a range of materials based on PTFE resin. Most notably known as DuPont® Teflon, PTFE (Polytetrafluoroethylene) makes an extraordinary material for seals because of its chemical compatibility, broad temperature range, and low friction properties.

Get Price
carbon filled ptfe | aft fluorotec - uk ptfe, peek

Carbon Filled PTFE | AFT Fluorotec - UK PTFE, PEEK

The most common carbon filled PTFE composition is 75% Virgin PTFE with 25% Carbon powder by weight. When a filler ratio or type is unspecified, it is fair to assume this is the material. However it doesn’t tell the whole story. The type and percentage of carbon added to PTFE is a variable and is critical to material performance.

Get Price